Power Options - EPC (External Power Control)
The MEMOLUB® EPC is a battery powered automatic lubricator that operates under its own preset program that controls the frequency of lubrication cycles and volume of lubricant injected. The on/off function of the MEMOLUB® EPC is controlled by an external switch. The 12 inch cable that extends from the bottom of the lubricator serves to interrupt the electric circuit to the drive motor. When a switch or relay closes the circuit, the MEMOLUB® EPC first goes through an output cycle and then proceeds to operate under its own preset program control. When the circuit is opened the lubrication process stops.
This model offers the same mounting options as the MEMOLUB® HPS either single-point or remote-mounted, using pipe or flexible tubing, or it can used with the MEMOLUB® 2-Point Splitter or the MEMOLUB® Multi-Point System lubricating from 2 to 12 lube points.
Click here for technical data sheet
| Specifications | |
| EPC (External Power Control) | |
| Media | Grease ( to NLGI #2) or Oil |
| Lubricant Cartridge Capacity | 120cc , 240cc, 480cc (Replaceable) |
| Delivery Method | Metered Quantity |
| Lubricant Flow Rate | 52 Adjustable Volume Output Settings (0.63cc / Stroke - standard) |
| Strokes per day | 0.5, 1, 1.5, 2, 4, 12, 24 |
| Operating Pressure | 350psi (25 bar) |
| Operation | Electro-Mechanical- Positive Displacement Pump |
| Feed Type | Single-Point or Multi-Point |
| Temperature Range ** | 5°F to 122°F (-15°C to 50°C) |
| Power Supply | 4.5VDC Battery Pack (Replacable) |
| External On/Off Control | Yes |
| Mounting Thread Size | 1/4" NPT(M) standard (1/8" NPT(M) available) |
| Multi-Point Compatible | Yes |
| Splitter Block Compatible * | Yes |
| Remote Installation (single-point) | Up to 40 feet (12 meters) |
| * Splitter Blocks cannot be used with oil, and are limited to 7 lubricant output settings. | |
| ** Lower temperatures can be achieved by using a lowtemp grease an cold-weather battery packs. | |